Clic on the bold references to see the plans of assembly
What you want | What you have | What you need | Fitting |
---|---|---|---|
1 swivel for original driver seat | The original Driver seat (Height adjustable) - with or without Airbag |
1 swivel
Ref.CBTO19G2C (symetric) |
Between slides(1) and original base
+ Handbrake lower adapter Ref. ACAFMTC (2) |
1 swivel for original passenger seat | The original Passenger seat (Height adjustable) - with or without Airbag |
1 swivel
Ref.CBTO19D2C (symetric) |
Between slides(1) and original base |
The simple original passenger seat (not height adjustable) |
1 swivel
Ref.CBTO19D2C (symetric) |
Between slides(1) and original base
+ seat modification (3) |
|
1 RIB / JOCKER Seat Driver side | The original standard Driver seat (Height adjustable) - WITHOUT AIRBAG |
All seat RIB or JOCKER,
+ anchor-adapter Ref.ACA98 + Adapter Ref.ACA96A ( with slides) |
onto original base |
1 RIB / JOCKER Seat Passenger side | The original standard Passenger seat - WITHOUT AIRBAG |
All seat RIB or JOCKER
+ anchor-adapter Ref.ACA98 + Adapter Ref.ACA96A ( with slides) |
onto original base |
1 passenger double-benchseat |
All seat RIB or JOCKER
+ anchor-adapter Ref.ACA98 + RIB base Ref.ACA78A-V362 H ( with slides) |
on the original floor-fixations points | |
1 RIB / JOCKER Seat + swivel driver side | The original standard Driver seat (Height adjustable) - WITHOUT AIRBAG |
All seat RIB or JOCKER
+ anchor-adapter Ref.ACA98 + swivel Ref.CBTRO02G2 + Adapter Ref.ACA97A ( with slides) |
onto original base |
1 RIB / JOCKER Seat + swivel passenger side | The original standard Passenger seat - WITHOUT AIRBAG |
All seat RIB or JOCKER
+ anchor-adapter Ref.ACA98 + swivel Ref.CBTRO02D2 + Adapter Ref.ACA97A ( with slides) |
onto original base |
1 passenger double-benchseat |
All seat RIB or JOCKER
+ anchor-adapter Ref.ACA98 + swivel Ref.CBTRO02D2 + caisson RIB Ref.ACA78A-V362 B ( with slides) |
on the original floor-fixations points | |
What you want | What you have | What you need | Fitting |
For a Right-Hand drive vehicle, please add "/GB" after each reference!
(1) rear external corner of the rails can be cutted to avoid any damage on the door (plastic parts) - If necessary.
(2) removal of the battery is necessary.
(2) ! Caution: not available for propulsion (Rear wheel drive) and 4WD versions!
(3) Cut the seat side covers (plastic + metal wire)
CASE NOT COVERED BY THE APPROVAL